testexam23 Hi,I just took Extreme Networks EW0-100 test and passed with a great score.All examcollection and securitytut dump are no longer valid anymore.I recommend studying Exampass Premium VCE.I can confirm that all Extreme Networks https://www.leads4pass.com/ew0-100.html new questions appear on my test. Keep up the good work and good luck!
Exam A QUESTION 1
What is the default value for the RIP garbagetime setting?
A. 30 seconds
B. 60 seconds
C. 120 seconds
D. 180 seconds
Correct Answer: C QUESTION 2
Given router interfaces 10.0.0.1/24, 10.10.10.10/24, 192.168.0.1/24, and 192.168.255.254/24 on a Summit7i switch what will be the OSPF router ID given the following command: config ospf routerid automatic?
A. 10.0.0.1/24
B. 10.10.10.10/24
C. 192.168.0.1/24
D. 192.168.255.254/24
Correct Answer: D QUESTION 3
Which command would you use to configure VLAN corporate with IP address 192.168.0.1/16?
A. config vlan corporate ipaddress 192.168.0.1/16
B. config ipaddress corporate vlan 192.168.0.1/16
C. config ipaddress 192.168.0.1/16 vlan corporate
D. config ipaddress 192.168.0.1/16 corporate vlan
Correct Answer: A QUESTION 4
VLAN aggregation allows multiple sub-VLANs to share a single IP subnet.
A. True
B. False
Correct Answer: A QUESTION 5
How do you disable Split Horizon?
A. disable rip splithorizon noadvertise
B. unconfig rip splithorizon
C. disable rip splithorizon
D. unconfig rip splithorizon noadvertise
Correct Answer: C QUESTION 6
Exhibit: Given this display, how would you find information similar to the SHOW SWITCH command?
A. Click on STATISTICS, then SHOW, then SWITCH.
B. Click on STATISTICS, then SWITCH, then SHOW.
C. Click on STATISTICS, then SHOW.
D. Click on STATISTICS, then SWITCH.
Correct Answer: D QUESTION 7
Which ExtremeWare feature permits ESRP to increase the number of protected VLANs by placing them under the control of a master VLAN?
A. ESRP groups
B. ESRP domains
C. ESRP host attach
D. None of these.
Correct Answer: B QUESTION 8
STPDs s0, s1, and s2 have been created. How would you activate only s1 while leaving the other STPDs inactive?
A. enable stpd s1
B. enable s1 stpd
C. None of these
Correct Answer: A QUESTION 9
SNMP access to ExtremeWare can be limited by the following methods:
A. Use an access list
B. Use an access profile
C. Use the disable snmp access command
D. None of these
Correct Answer: ABC QUESTION 10
How would you change the password for John Doe’s management account?
A. Enter config jdoe and then enter the new password twice.
B. Enter config jdoe user account and then enter the new password twice.
C. Enter config user account jdoe and then enter the new password twice.
D. Enter config account jdoe and then enter the new password twice.
Correct Answer: D QUESTION 11
What is the minimum ExtremeWare software version that supports the Summit48i?
A. ExtremeWare 4.x
B. ExtremeWare 5.x
C. ExtremeWare 6.x
D. None of the above
Correct Answer: C QUESTION 12
When using Spanning Tree Protocol, ExtremeWare permits VLANs in different STPDs to share the same port when tagged.
A. True
B. False
Correct Answer: B QUESTION 13
Which of the following routes will be used to forward a frame to 192.168.1.174?
A. 192.168.1.0/29
B. 192.168.1.128/30
C. 192.168.1.128/25
D. None of these.
Correct Answer: C QUESTION 14
In RIP, poison reverse means that:
A. A route is not advertised to the interface from which it was learned.
B. A route is advertised as unreachable to the interface from which it was learned.
C. Traffic whose source interface does not match the routing table is blackholed.
D. None of these.
Correct Answer: B QUESTION 15
RIP version 2 uses a composite metric that includes link speed and delay.
A. True B. False
Correct Answer: B QUESTION 16
Unlike VRRP, the Extreme Standby Router Protocol provides redundancy at both the data link and network layers.
A. True
B. False
Correct Answer: A QUESTION 17
__________ allow(s) multiple VLANs to be controlled by a single ESRP instance.
A. ESRP domains
B. ESRP groups
C. ESRP host-attach
D. None of these.
Correct Answer: A QUESTION 18
QoS policy is applied _____ in an Extreme switch.
A. per port
B. per queue, per port
C. per queue
D. None of these.
Correct Answer: B QUESTION 19
Without QoS, all packets are allowed equal access to an egress port.
A. True
B. False
Correct Answer: A QUESTION 20
Which of the following is not advertised in an OSPF Link State Advertisement?
A. Costs
B. Link utilization
C. Router interfaces
D. Neighbor information
Correct Answer: B QUESTION 21
A VLAN can be a member of up to 64 STPDs.
A. True
B. False Correct Answer: B QUESTION 22
What type of area is used to limit external routes?
A. Stub area
B. Normal area
C. Backbone area
D. None of these
Correct Answer: A QUESTION 23
All OSPF routers in the same area must have the same LSDB.
A. True
B. False
Correct Answer: A QUESTION 24
Which RIP settings are enabled by default?
A. Triggered updates
B. Poison Reverse
C. Split Horizon
D. Route redistribution
Correct Answer: ABC QUESTION 25
What is the default STP forward delay value?
A. 2 seconds
B. 10 seconds
C. 15 seconds
D. 20 seconds
Correct Answer: C QUESTION 26
Which command would you use to configure the switch to disregard STP for selected VLANs?
A. enable ignore-stp vlan <stpd>
B. enable ignore-bpdu vlan <vlan>
C. enable ignore-bpdu stpd <stpd>
D. enable ignore-stp vlan <vlan>
Correct Answer: D QUESTION 27
When the command disable stpd port 4:1-4:8 is entered what is the result?
A. Ports 4:1-4:8 are placed into the blocking state.
B. Ports 4:1-4:8 are placed into the listening state.
C. Ports 4.1-4.8 are placed into the learning state.
D. Ports 4:1-4:8 are placed into the forwarding state.
Correct Answer: D QUESTION 28
How can you tell which ports are disabled?
A. Flashing amber light
B. Flashing green light
C. Flashing red light
D. None of these
Correct Answer: B QUESTION 29
Your Summit5i switch is connected to a 3rd party switch. By issuing the show ports rxerrors command you can see numerous CRC errors listed. What is the first step you should take to resolve this issue?
A. Examine the log for errors.
B. Ping between the two switches.
C. Match the speed and duplex settings for the two devices.
D. Call the Extreme Networks TAC.
Correct Answer: C QUESTION 30
You have been assigned the task of configuring an 8-port load share group between two switches that uses the round robin-based algorithm. Which of the following commands will provide you with the desired result?
A. Summit #1: config sharing 1 grouping 1-8 algorithm round-robin, Summit #2: configsharing 1 grouping 1-8 algorithm round-robin
B. Summit #1: enable sharing 1 grouping 1-8 algorithm round-robin, Summit #2: enablesharing 8 grouping 1-8 algorithm round-robin
C. Summit #1: config sharing 1 grouping 1-8 algorithm round-robin, Summit #2: configsharing 8 grouping 1-8 algorithm round-robin
D. Summit #1: enable sharing 1 grouping 1-8 algorithm round-robin, Summit #2: enablesharing 1 grouping 1-8 algorithm round-robin
Correct Answer: D
Flydumps.com is providing complete solutions for Extreme Networks EW0-100 that will help the candidates learn extensively and score exceptional in the Extreme Networks https://www.leads4pass.com/ew0-100.html exam. Passing the Microsoft is not a dream anymore as our user friendly learning resources ensure guaranteed success.