testexam23 Good News!The Flydumps EMC E20-690 exam questions and answers covers all the knowledge points of the real exam. With our leader 4 pass EMC E20-690 practice test, you will never worry about the exam.Recently the new version with all new updated EMC E20-690exam dumps can free download on the site Flydumps.com.Visit the site to get more exam information.
QUESTION 45
During the installation of a VNX gateway system you are loading the VNX OE for File software and the console prompts you for the Control Station IP settings used by the internal network to manage the DME. What action should you take?
A. In a separate console session, perform a ping operation to prevent duplicate IP addressing.
B. Configure the internal Control Station networking to obtain its IP addressing from BOOTP.
C. Accept the default settings unless they conflict with the Control Station public network addressing.
D. Remove the existing IP address setting; it will be assigned automatically.
Correct Answer: C
QUESTION 46
During a VNX gateway installation, on which storage system is the Auto-Config option available?
A. VNX Block
B. Symmetrix
C. VNX File
D. VNXe
Correct Answer: A
QUESTION 47
What are the required control volume HLU IDs for a VNX gateway?
A. 0-5
B. 16-21
C. 1-6
D. 6-11
Correct Answer: A
QUESTION 48
What are the required initiator record settings for a VNX gateway?
A. CLARiiON OpenFailover Mode 4Array CommPath disabledUnit Serial Number set to Array
B. CLARiiON OpenFailover Mode 0Array CommPath disabledUnit Serial Number set to Array
C. CLARiiON OpenFailover Mode 1Array CommPath disabledUnit Serial Number set to Array
D. CLARiiON OpenFailover Mode 0Array CommPath enabledUnit Serial Number set to Array
Correct Answer: B
QUESTION 49
When installing a VNX gateway in the Auto-Config mode, which step is optional?
A. Create system RAID groups and LUNs for VNX File
B. Configure fibre switch zoning for Data Movers
C. Set up the Data Mover initiator records
D. Set up VNX Block storage groups
Correct Answer: A
QUESTION 50
Which script is run to verify the status of the VNX gateway after installation?
A. nas_checkup
B. nas_storage
C. nas_summary
D. nas_catalog
Correct Answer: A QUESTION 51
During a VNX gateway manual installation you are registering Data Mover initiators on the VNX Block back-end array. Which 8-byte WWN is the initiator for Data Mover 2 HBA 1?
A. 5006016036A00190
B. 5006016136A00190
C. 5006016836A00190
D. 5006016936A00190
Correct Answer: B QUESTION 52
During a VNX gateway manual installation you are registering Data Mover initiators on the VNX Block back-end array. Which 8-byte WWN is the initiator for Data Mover 2 HBA 0?
A. 5006016036A00190
B. 5006016136A00190
C. 5006016836A00190
D. 5006016936A00190
Correct Answer: A QUESTION 53
Which describes a direct-attached VNX gateway system with a VNX Block back end?
A. Each Data Mover has two paths to the VNX Block system where each of the two Data Mover HBAs has a single path to an SP.
B. Each Data Mover has four paths to the VNX Block system where each of the two Data Mover HBAs has a path to SP A and SP B.
C. Each Data Mover has eight paths to the VNX Block system where each of the four Data Mover HBAs has a path to SP A and SP B.
D. Each Data Mover has four paths to the VNX Block system where each of the four Data Mover HBAs has a single path to an SP. Correct Answer: A QUESTION 54
You have been tasked to perform an installation of a VNX system configured as file-only. Where will you find the installation procedure for the system?
A. VNX Installation Assistant
B. Unisphere Service Manager
C. VNX Procedure Generator
D. Powerlink Knowledgebase
Correct Answer: C QUESTION 55
A customer requests information about where to find the installation procedures for an enterprise class VNX Unified system. How should you respond?
A. The procedure is generated from the VNX Procedure Generator available in the customer view from Powerlink.
B. An enterprise class VNX Unified system is not customer installable and a customer-specific installation procedure is not available.
C. The procedure is generated from the VNX Procedure Generator available from the Powerlink EMC Services Partner Web.
D. The procedure for installing VNX systems is contained within the VNX Installation Assistant software. Correct Answer: A QUESTION 56
A customer requests information about where to find the installation procedures for a mid-tier VNX Unified system. How should you respond?
A. The procedure is generated from the VNX Procedure Generator available in the customer view from Powerlink.
B. A mid-tier VNX Unified system is not customer installable and a customer-specific installation procedure is not available.
C. The procedure is generated from the VNX Procedure Generator available from the Powerlink EMC Services Partner Web.
D. The procedure for installing VNX systems is contained within the VNX Installation Assistant software.
Correct Answer: A QUESTION 57
You have been tasked to perform an installation of a VNX system configured as block-only. Where will you find the installation procedure for the system?
A. VNX Installation Toolkit
B. Unisphere Service Manager
C. VNX Procedure Generator
D. Powerlink Knowledgebase Correct Answer: C QUESTION 58
On VNX Unified series X-blade, which is the correct cabling configuration for the 4-port 8 Gb FC I/O module in slot 0?
A. Two ports for tape backup and two for SP A and SP B back-end connectivity.
B. All four ports connected to SP A and SP B for high availablity.
C. Two ports for tape backup and two for external SAN replication.
D. Four ports for NDMP tape backup. Correct Answer: A
EMC E20-690 Questions & Answers covers all the knowledge points of the real exam. We update our product frequently so our customer can always have the latest version of EMC E20-690. We provide our customers with the excellent 7×24 hours customer service.We have the most professional EMC E20-690 expert team to back up our grate quality products.If you still cannot make your decision on purchasing our product, please try our EMC E20-690 free pdf.